M3/M6/M10/M15/M20/Mx20/Mx25/Ts6/Ts20/Tl10/T20 Yojo Gasket Plate Heat Exchanger HVAC Marine Heat Exchanger Gasket Plate

Overview

Basic Info.

Model NO.	B100B
Material	Stainless Steel
Max.LC(mm)	4800
Dimension(L*W*H)	1150*2882*LC
Place of Origin	Jiangyin
Brand Name	Yojo
The Maximum Number of Pieces(N)	700
Connection	350
Design Pressure(MPa)	1.0/1.6/2.5
Bottom of Centre to Ground (mm)	470
Maximum Flow(M³/H)	997
Transport Package	Plywood Box
Specification	1150*2882*LC
Trademark	YOJO
Origin	Jiangyin
HS Code	8419500090
Production Capacity	Plate Heat Exchanger

Product Description

Product Description

Model	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)
B350B	N(3.3+X)	1150	596	2882	1842

The bottom of the center to ground level(mm)	470
MAX.LC(mm)	4800
Interface Path(mm)	350
Monolithic heat transfer area(m2)	1.85
The maximum number of pieces(N)	700
Maximum flow(m3/h)	997
Design pressure(Mpa)	1.0/1.6/2.5

Can be customized according to customer's requirements.

Plate Material	Suitable fluid
Stainless steel (SUS304, 316L etc.)	Pure water, River water, Edible salt water, Mineral oil
Titanium, ti-pd	Brine, sea water, Salt water
SMO254	Dilute sulphuric acid, Salt water solution, Inorganic aqueous solution
Ni	High temperature, High concentration of caustic soda
Hastelloy (C276, C22)	Concentrated sulfuric acid, Hydrochloric acid, Phosphoric acid

Main Body Gasket	Operating Temperature (ºC)	Suitable Fluid
NBR	-15 ~ +135	Water, Sea water, Mineral Salt, Brine
EPDM	-25 ~ +180	Hot water, Vapour, Acid, Base
F26	-25 ~ +230	Acid, Base, Fluid
FTP	0 ~ +160	Concentrated acid, Base, High temperature oil, Vapour

Plate Type	Application
Lower Runner (B)	Temperature drop of heat-transfer medium too large, Temperature difference of logarithm too small
High Runner (H)	Request of viscosity, Fibroid, Pressure drop too small

Detailed PhotosTypes

Model	A (mm)	B(mm)	C (mm)	D (mm)	E (mm)	MAX.LC (mm)	Connection (mm)	Exchange area (m2)	Max. number of plates	Max. volume flow (m3/h)	Design pressure
M3 / B30B	N(2.5+X)	180	60	480	357	500	32	0.032	95	18	1.6
TS6M / S60H	N(4+X)	400	203	704	380	1200	65	0.086	147	50	1.6
M6 / B60B	N(2.0+X)	320	140	920	640	1200	50	0.15	250	36	1.6
M6M / B60H	N(3.0+X)	320	140	920	640	1200	50	0.15	203	36	1.6
K60B	N(2.0+X)	320	140	950	689	1200	50	0.12	250	36	1.6
K60H	N(3.0+X)	320	140	950	689	1200	50	0.12	203	36	1.6
M10B / B100B	N(2.55+X)	470	225	1069	719	1600	100	0.25	278	140	1.0/1.6/2.5
M10M / B100H	N(3.95+X)	470	225	1069	719	1600	100	0.25	180	140	1.0/1.6/2.5
K100B	N(2.55+X)	470	225	1099	763	1600	100	0.3	278	140	1.0/1.6/2.5
K100H	N(3.95+X)	470	225	1099	763	1600	100	0.3	180	140	1.0/1.6/2.5
TS20M / S200H	N(4+X)	800	363	1405	698	3000	200	0.3	400	600	1.6
TL10 / L100B	N(2+X)	480	225	1888	1338	3000	100	0.5	400	140	1.0
K150H	N(3.95+X)	610	298	1616	1095	3000	150	0.5	600	360	1.0/1.6/2.5
M15B / B150B	N(2.5+X)	610	298	1815	1294	3000	150	0.65	600	360	1.0/1.6/2.5
M15M / B150H	N(3.95+X)	610	298	1815	1294	3000	150	0.65	600	360	1.0/1.6/2.5
M20M / T20M / B200H	N(4+X)	780	353	2260	1478	3000	200	0.85	400	600	1.0/1.6
MX20B / MX25B / B250B	N(2.5+X)	920	439	2895	1939	3000	250	1.5	500	750	1.0/1.6/2.5
M30 / B350B	N(3.3+X)	1150	596	2882	1842	4800	350	1.85	700	997	1.0/1.6

CertificationsPackaging & ShippingCompany ProfileOur Advantages

High EfficiencyThe embossed pattern of the YOJO's special heat transfer plates promotes high turbulence at low fluid velocities. The high turbulence results in very high heat transfer coefficients.Compact SizeYOJO's brazed heat exchanger can be anywhere from 50% to 80% smaller than other types of heat exchangers. It requires less floor space due to the high thermal efficiency of the stainless steel. The plates are brazed together at high temperatures, allowing the heat exchanger to be compact, leak tight, and rugged.Close Approach TemperaturesClose-approach temperatures of 1-2°F (0.5-1.0°C) are possible because of true counter flow and high heat transfer efficiency of the plates. This is an important factor in regeneration and heat recovery processes.High Temperature and Pressure RatingsYOJO's Brazed Plate Heat Exchanger maximum working pressures from 300 psi to 650 psi, and temperature ratings of 350°F.

Application

Refrigeration Systems:Evaporator,Condenser,Economizers and DesuperheatersAir dryerHeat pumpAbsorptionchillerHVACRadiant Floor,Snow Melt,Boiler and Solar water heat exchangerDistrict heatingOther Industrial applications such as:Heat Recovery and Oil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.Steam Heating.Flat plate heat exchangerBeer wort coolerMilk pasteurizationWind turbine oil coolerMarine oil cooler